Skier to Skier Club Member Store

Props, Rudders, Seals, and Boating goods

Please disable pop-up blockers -- our shopping basket and check out software use pop up screens. If you hang -- it is most likely your pop-up blocker. You can usually do this with a right mouse click right under the address bar of your browser.

OJ 3 Blade XMP CNC Prop 13" Nibral

OJ XMP 3 Blade prop for direct drive boats!

OJ 3 Blade Nibral XMP Prop replaces all 13 x 13 and 13 x 14 props. This is a great prop for direct drive boats. In our test, it has out performed the 4 blade on 1 to 1 transmission boats. It has more surface area than the 4 blade prop. FYI -- most 13 x 13 boats do best with the 13 x 11.5 XMP 3 Blade-- Free Shipping on all orders over $100

OJ 4 Blade XMP Prop 12.5" Nibral

Larger picture

OJ XMP Prop.

OJ Revolution XMP CNC machined Nibral 4 Blade Prop 12.5 inch -- replaces 13 inch Legend or Force . This is the prop we recommend for boats with 1 to 1 transmission boats that have a huge amount of ballast weight. -- Free Shipping on all orders over $100

OJ 4 Blade XMP CNC Prop 13 - 13.7" Nibral

XMP 4 Blade Prop

OJ 4 Blade XMP CNC Machined 13" - 13.7" series Prop (same as14 inch Legend) Nibral. This is the prop of choice for boats with gear reduction transmissions.

-- Free Shipping on all orders over $100

OJ 4 Blade XMP CNC Prop 14.75" Nibral

XMP 4 Blade Prop

OJ 4 Blade XMP CNC Machined 14.75" series Prop used on many 2008 and newer with 1.22 thru 1.26 gear reduction. Nibral. This is the prop of choice for boats with gear reduction transmissions.

-- Free Shipping on all orders over $100

OJ 5 Blade TZX5 Nibral

OJ's TZX5 Wakeboard Prop

The 5 blade TZX5 is all the rage for wakeboarding. Offering unmatched hole shot and speed control. The TZX5 is the prop of choice for every wakeboard boat out there regardless of manufacturer. The TZX5 is available in both splined and keyed. Simply tell us the make, model, year, and engine of your boat and we will match up the size and send the prop your way.

-- Free Shipping on all orders over $100

OJ 4 Blade XMP EDGE Prop 14 - 14.5" Nibral

XMP EDGE 4 Blade Prop

The EDGE is the prop that revolutionized the wakeboard market as well as for other big inboards. The EDGE is a proven prop that offers an economic option for the price conscious buyer.

-- Free Shipping on all orders over $100

Just in Case Prop Kit - C clamp style

OJ Just in Case Prop Kit -- C-Clamp Style.

Includes C-Clamp style puller (we recomend this type of puller), wrench, spare prop nut, spare cotter pin, spare 1/4 key. DOES NOT INCLUDE THE PROP. Stash this under you passenger seat with a spare prop and you are good to go. Protects both your spare prop as well as your boat's interior.

Prop Tool Kit - C clamp style

OJ Prop Tool Kit -- C-Clamp Style.

Tool Kit includes C-Clamp style puller (we recomend this type of puller), wrench, spare prop nut, spare cotter pin, spare 1/4 key.

Just in Case Prop Kit - Knocker Style

OJ Just in Case Prop Kit -- Harmonic Knocker Style

Includes harmnic knocker style puller, wrench, spare prop nut, spare cotter pin, spare 1/4 key. Screw the knocker on the end of the shaft and whack it with a hammer to loosen the prop. DOES NOT INCLUDE THE PROP. Stash this under you passenger seat with a spare prop and you are good to go. Protects both your spare prop as well as your boat's interior.

OJ Prop Puller

Prop C-Clamp style puller for 3 and 4 blade props. This is what Max keeps in his prop kit for removing props.

OJ Prop Knocker

OJ Prop Knocker -- remove the prop nut and screw on the prop knocker. Take off the prop nut. Screw on the knocker. Smack the knocker end with a hammer and the harmonics cause the prop to "pop" loose.

Folding Swim Platform Bracket

OJ OEM Folding Platform Bracket

Folding swim platform bracket by OJ. This bracket is OEM for many boats. Will easily replace non-folding brackets. Usually without drilling new holes in transom. Two sizes. Regular width for standard platforms. Wide for extra large platforms. Click on the picture link to see more pictures.

OJ Rudders - Three sizes

OJ Rudders, Ports, and Tiller Arms

OJ Rudders are OEM on many boats. We have access to the complete OJ line of underwater gear. The rudders will replace your existing rudder using your existing port and tiller arm. You can upgrade to the kit which has the new high performance port with Vesconite seals. 161 Model is standard on MasterCraft ProStars. The 162 Model is standard on X-Stars. Wakeboarders -- checkout the CSX model extra large rudder. Click below the picture to the right to get the specs and pictures of the 3 different rudders.

Rudder Port

OJ OEM Rudder Port

OJ OEM Rudder Port with XPC low friction bushings and seals.

OJ Dripless Shaft Seal Kit

Complete Dripless Seal Kit

Replaces packing nut asembly.

OJ Props has designed the entire XPC Marine Drive Systems line around Vesconite composites, and the difference shows.

With up to 10 times the lifespan of conventional materials, XPC products keep going long after traditional materials have given up. And with their incredible load-bearing strength, XPC bearings make shaft wear practically disappear.

The growl you’re used to hearing during acceleration, deceleration and hard turns is virtually gone. With XPC products, your system runs noticeably quieter, both inside and outside the boat.

Strut by OJ

Prop Shaft Strut

OJ OEM prop shaft struts. These are the same struts used by the boat manufacturers. Has new OJ low friction bushings.

Strut Replacement Bearings/Bushings Kit

OJ Low Friction Stut Bearings/Bushings

Will replace OEM bushings with new low friction bushings. Kit contains one or two bushings as needed to rebuild one strut unit.

Tracking Finns

OJ Underwater Tracking Fins

OEM tracking fins for boats like MasterCraft and Malibu. Will work on many inboards. Price is $63 each.

Don't See

If you do not see what you are looking for, drop us an email at sales@skiertoskier.com

Shopping cart by ShopFactory